Innovation stimulates the market. One of our contributions to innovation is to extrude the new SOLVAY PEEK-HT material, which may be used in particular in the chemical industry.
With PEEK-HT, Solvay developed a new material which has a glass transition temperature (170 °C) and heat deflection temperature (HDT/A=175 °C) that are both approx. 20 °C higher that those of PEEK, without losing its high chemical resistance. This is usually the case with the materials from the same material family, such as PEK, PEKK or PEKEKK. The melting point of PEEK-HT is approx. 385 °C. At the same time, it was possible to significantly increase the dielectric strength from 16 to 23 kV/mm.The raw material manufacturer now specifies a compressive strength of 160 MPa compared to the former value of 118 MPa. The notched impact strength, measured according to ASTM D256, is also specified with an increased value of 106 J/m compared to 91 J/m for standard PEEK.
Here you will find an overview of all product information sheets matching your selection. Are you interested in our materials or do you have a question about a specific productContact us
Tel: +1 610 497 – 8941
Fax: +1 610 497 – 8901
GEHR Plastics Inc.
24 Creek Circle
Boothwyn, PA 19061
You’re interested in our materials or you have a question about a particular product?
Please send us an e-mail:
or use our contact form.
We will get in touch with you as soon as possible.
Our facilities and sales offices you find